|
| |
Recent Publications by French Engineering, Inc.
-
French,
Warren R., "Post-Installation Field Evaluation of a
Pressure-Equalized Single-Ply Roofing System to Determine Drying
Effects on a Moist Cementitious Roof Deck," Proceedings of
the RCI 14th International Convention and Trade Show,
March 12-16, 1999, Charlotte, NC, Roof Consultants Institute, Raleigh,
NC, 1999.
-
French,
Warren R., " Field Performance of Single-Ply, Chlorinated
Polyethylene (CPE) Roof Membranes," Roofing Research and
Standards Development: 4th Volume, ASTM STP 1349, T. J.
Wallace and W. J. Rossiter, Jr., Eds., American Society for Testing
and Materials, 1998.
-
French,
Warren R., "Design and Renovation of a High-Rise Retrofit EIFS
Cladding: A Case Study," Water Problems in Building
Exterior Walls: Evaluation, Prevention, and Repair, ASTM STP 1352,
Boyd, Jon M., Ed., American Society for Testing and Materials, 1997.
-
French,
Warren R., "Water Vapor Diffusion and Techniques for
Evaluating Vapor Flow Using Vapor Pressure Graphs," Development,
Use, and Performance of Exterior Insulation and Finish Systems (EIFS),
ASTM STP 1187, Mark F. Williams and Richard G. Lampo, Eds.,
American Society for Testing and Materials, Philadelphia, 1995.
-
French,
Warren R., "Recommendations for Remedial and Preventative
Actions for Existing Commercial, Institutional, and High-Rise
Buildings," Moisture Control in Buildings, ASTM Manual
Series: MNL 18, Heinz R. Trechsel, Ed., American Society of
Testing and Materials, Philadelphia, 1994, Chapter 20, pp. 371-394.
-
French,
Warren R., "The Practical Use and Potential Limitations of
Exterior Insulation and Finish System Materials as an Exterior
Building Envelope," Water in Exterior Building Walls:
Problems and Solutions, ASTM STP 1107, Thomas A. Schwartz, Ed.,
American Society of Testing and Materials, Philadelphia, 1991.
-
French,
Warren R., "In-situ Testing of the Structural Integrity of
Exterior Insulation and Finish Systems," Water in Exterior
Building Walls: Problems and Solutions, ASTM STP 1107, Thomas A.
Schwartz, Ed., American Society of Testing and Materials,
Philadelphia, 1991.
|
